Sign up to our newsletter to stay up to date with our latest news, including 3D Printing developments, Rapid Prototyping technologies and Low Volume Production solutions.
Since its conception in the 1980s, Rapid Prototyping has become an essential process for manufacturers to add value to the product development cycle, by allowing products to be developed, tested and manufactured without committing to production tooling and the financial implication that brings.
At Paragon we believe that Rapid Prototyping has the ability to transform product development; speeding up the rate of production and helping companies take their products to market quickly at a reduced cost.
Although Rapid Prototyping began as a high cost method, the development of processes like Stereolithography has seen it become much more accessible; opening the door for wider commercial benefits and more efficient product development for Low volume production.
These benefits are not limited to any one sector, with Rapid prototyping processes used in various industries from the Automotive and Medical sectors to Energy and Defence, adopted throughout the entirety of a product’s development cycle from the initial concept evaluation right through to post production analysis.
Design development times have been significantly reduced thanks to the ability to quickly edit and adapt a digital design, before generating a development model via 3D printing. This increased flexibility has also meant that new avenues and design opportunities can be explored – resulting in a better concept.
The ability to produce multiple iterations of a design at the early stages of product development has meant that products can be optimised with the end user in mind. The ergonomics of a product can be an early stage consideration, as no expensive re-tooling processes are required to produce multiple concept models.
Rapid Prototyping processes like additive manufacturing allow for greater customisation at much lower volumes than regular manufacturing techniques. Developing existing products and creating completely new ones can be achieved without further tooling costs or additional machinery. Designers also have significantly greater freedom to create novel shapes and structures of almost limitless complexity, unshackled by the limitations, time and cost of traditional manufacturing processes.
Rapid Prototyping accelerates the rate of product development, allowing manufacturers to bring about a quicker return on investment by commencing production tooling at an earlier stage. By making use of additive manufacturing, we can quickly build accurate, functional prototypes which can be sooner brought to market. Rapid Prototyping is also beneficial for companies wanting to undertake product testing and gain valuable user feedback, which can lead to improvements in design and ultimately, an improved product.
A physical concept model produced through Rapid Prototyping can give invaluable information regarding the manufacturability of the design, as well as drawing attention to the relationship between parts, which is particularly useful when it comes to assembly. Highlighting any issues with the design at this stage of development will reduce manufacturing time and cost, as manufacturers have the opportunity to perform essential design improvements. With additive manufacturing, we can also produce multiple parts as a single component, thus reducing assembly time, excess tooling, cost and quality control requirements when it comes to general manufacture.
Advances in software allow for complex digital analysis of stresses and loads within components. This data enables non-load bearing material to be removed from the product, thus reducing weight without compromising internal structure and strength. Additive manufacturing is well suited to creating lattice structures that provide essential support, reducing the overall weight of the product and the amount of material required. In Additive Manufacturing, material is only added where needed, so it is an extremely efficient process. Unlike more traditional machining processes which are subtractive, additive manufacturing can lead to significant cost savings by minimising waste, especially when expensive materials are used.
Improvements in sintering and casting processes have enabled us to create more functional prototypes, which can be used in extensive field trials. The flexibility of these processes in developing working prototypes allows for further assessment of the design, leading to valuable improvements and reduced risk – all at a lower cost.
It used to be the case that to achieve a cost effective manufacturing process, companies had to produce in high volumes, thus minimising the impact of investment in production tooling. However, thanks to Rapid Prototyping processes such as Selective Laser Sintering (SLS), we can now create products that mimic the look and feel of injection moulding but without the extra tooling investment. Now designers have more choice of material properties to consider, breaking many of the constraints of high volume production mouldings.
Rapid Prototyping processes have a short tooling lifespan; some do not require tooling at all. This allows for ongoing changes and alterations to be made to the design without further cost of tool modifications. Manufacturers can release products in controlled batches for trial, making improvements to the design based on initial feedback.
At Paragon we are committed to using additive manufacturing and other Rapid Prototyping processes to provide low volume production solutions for our clients. With continual investment in people, skills and technology we have developed impressive production capabilities and a flexible approach to completing projects across a wide range of sectors including Automotive, Oil & Gas, Aerospace, Medical and Defence.
To find out more about our Rapid Prototyping capabilities, ask for a quote today.